panasonic MQM0058DG210311REV1 Horizontal Bar Noise free download

File name MQM0058DG210311REV1_Horizontal_Bar_Noise.pdf

Confidential For Authorised Service Agents Only Ref No: MQM0058DG210311REV1 TECHNICAL INFORMATION A BY D EST H IS N PL SK UA Date 21/03/2011 AL CH DK F I L NL RO SLO FIN Country Reported B CZ E GB IRL LT P S TR EU Product Category: Plasma Television / Plasma IDTV Subject: Horizontal bar noise on screen Model(s) Affected: All 2010 models Symptom / Due to component failure (IC9300), either horizontal belt noise, or horizontal dot noise can be seen on the screen. In some cases both may be visible. Cause: (See the figures below for symptom examples) Remedy / This modification applies to all units prior to serial number: F*-052**** Method: Replace either the A-PCB OR the D-PCB according to the model. For models fitted with a D-PCB that has IC9300 mounted on it, replace the D-PCB. For all other models, replace the A-PCB. Belt noise Dotted line noise Fig.1: D-PCB Fig.2: D-PCB Fig.3: A-PCB Fig.4: A-PCB Dotted line noise Fig.5: A-PCB Fig.6: A-PCB Belt noise Warranty Claims - Please use the following IRIS and Activity codes Activity Codes: Guarantee Status Repair Type Location Source (UK Only) A X W D Symptom Section Defect Condition Repair IRIS Codes: Area Type Code Area Code Area Code 1 3 4 343 3 VPD 2 N i Note: Failure to use the correct IRIS and Activity codes may result in the claim being rejected Document No: MQM_TI Panasonic